No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Statistics Collection Method to Improve Accounting Accuracy

(Optional) Configuring the Statistics Collection Method to Improve Accounting Accuracy

Context

One or two layers of VLAN tags are added to each user packet transmitted over a MAN. The NE40E counts VLAN header length into packet length when collecting statistics about user packet bytes. As a result, the number of bytes sent by a user terminal greatly deviates from the number of bytes in the statistics collected by the NE40E. To improve accounting accuracy, you can configure the NE40E to exclude VLAN header length from packet length when collecting statistics about packet bytes of Layer 2 IPoE and PPPoE users.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    The domain view is displayed.

  4. Run accounting exclude-type vlan access-user layer2 { ipoe | pppoe } *

    The NE40E is configured to exclude VLAN header length from packet length when collecting statistics about user packet bytes.

    This configuration applies to both IPv4 and IPv6 packet statistics.

    After this command is configured, the number of bytes sent by the user terminal deviates little from the number of bytes in the statistics collected by the NE40E. If no packet is lost, the two numbers are the same.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17237

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next