No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Binding a VT to an Interface

Binding a VT to an Interface

Bind a VT to an interface so that data on the interface can be transmitted based on parameters defined in the VT.


After a VT is configured, bind it to an interface. The type of the interface to which a VT is bound varies depending on the user access type.

  • The VT configured for PPPoE services must be bound to a main interface.

  • The VT configured for PPPoEoVLAN services must be bound to a sub-interface.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number [ . subinterface-number ]

    The interface or sub-interface view is displayed.

    Specify a main interface for PPPoE access users and a sub-interface for PPPoEoVLAN access users.

  3. Run pppoe-server bind virtual-template vt-number

    A VT is bound to the interface.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 19258

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next