No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AAA Schemes

Configuring AAA Schemes

By configuring AAA schemes, you can determine the authentication, authorization, and accounting modes for a user.

Context

This configuration is used to authenticate the identity information (user name and password) of a remote dial-in user using AAA. The LAC can initiate a tunnel establishment request only after the user identity is authenticated. Otherwise, the LAC does not establish a tunnel for the user.

Two AAA authentication modes are supported: local authentication and remote authentication.

Procedure

  1. If the local authentication mode is used, you need to configure a local user name and password on the LAC. The LAC authenticates a dial-in user by checking whether the user name and password of the user are the same as the locally configured user name and password.
  2. If the remote authentication mode is used, you need to configure a user name and password on the RADIUS server. The LAC sends the user name and password of a dial-in user to the RADIUS server, and the RADIUS server authenticates the user.
  3. For details about AAA operations, see Configuring AAA Schemes. For details about RADIUS server operations, see Configuring a RADIUS.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17114

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next