No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Configuration Guide - User Access 01

This is NE40E V800R010C10SPC500 Configuration Guide - User Access
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Tunnel Password Delivery Mode

(Optional) Configuring the Tunnel Password Delivery Mode

The RADIUS server supports a tunnel password in cipher text or plain text.

Context

The RADIUS protocol specifies that the RADIUS server must deliver the tunnel password in cipher text. Most RADIUS servers, however, do not conform to this specification. Therefore, the NE40E supports configuration of the tunnel password delivery mode so that the NE40E can communicate with various types of RADIUS servers.

Perform the following steps on the router:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run radius-server group group-name

    The RADIUS server group view is displayed.

  3. Run radius-attribute tunnel-password { cipher | simple }

    The mode in which the RADIUS server delivers the tunnel password is configured.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055031

Views: 17123

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next