No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Configuration Guide - Value-Added-Service 01

This is NE40E V800R010C10SPC500 Configuration Guide - Value-Added-Service
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DAA Configuration Logic

DAA Configuration Logic

DAA Deployment on a New Network

The roadmap for deploying DAA on a new network is as follows:

  1. Build a network environment.
    • Ensure that authorized users can access the network regardless of which authentication or accounting mode is used.

    • Plan an AAA domain and a user group and ensure that they can distinguish various service types and accommodate users of the corresponding service types.

  2. Deploy DAA services on the BRAS.
    1. Plan and configure basic items, such as interfaces and routes.

    2. Plan an authentication mode, an accounting mode, a RADIUS server group, and an address pool for the AAA domain.

    3. Plan user groups.

    4. Configure DAA.

DAA Deployment on an Existing Network

The DAA networking mode is similar to a general AAA networking mode. The following points must be noted:

  • Check whether the used AAA server type is available for the DAA function on the BRAS and whether a device functions as a policy server.

  • Check whether the configured AAA domain and user group are consistent with DAA deployment objectives. If they are inconsistent, reconfigure an AAA domain and a user group and ensure that the reconfiguration does not affect user services or AAA procedures.

  • Do not configure both DAA and behavior aggregate (BA) classification because they are mutually exclusive.

Updated: 2019-01-03

Document ID: EDOC1100055032

Views: 4269

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next