No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE40E V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


User Management

You can configure, monitor, and maintain local or remote network devices only after configuring user interfaces, user management, and terminal services. User interfaces provide login venues, user management ensures login security, and terminal services provide login protocols. Routers support user login over console ports.

User Interface

A user interface is presented in the form of a user interface view for you to log in to a router. You can use user interfaces to set parameters on all physical and logical interfaces that work in asynchronous and interactive modes, and manage, authenticate, and authorize login users. Routers allow users to access user interfaces through console ports.

A console port is provided by MPU of a router. MPU provides one console port that conforms to the EIA/TIA-232 standard. The console port is a data connection equipment (DCE) interface. The serial port of a user terminal can be directly connected to a router's console port to implement local configurations.

User Login

When a router starts for the first time, no user name or password is configured on it. However, the router prompts you to configure a password during the first login. After you configure a password for a router, you must enter the configured password before logging in to the router through the console port.


When a router is powered on for the first time, you must log in to the router through the console port, which is a prerequisite for other login modes as well. For example, you can use Telnet to log in to a router only after you use the console port to log in to the router and configure an IP address.

Updated: 2019-01-03

Document ID: EDOC1100055037

Views: 5532

Downloads: 36

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next