No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE40E V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of ZTP

Overview of ZTP

This section defines zero touch provisioning (ZTP) and describes its purpose and the benefits that it can bring.


ZTP enables a device to automatically load version files, including system software, configuration files, and patch files, when the device starts with the factory default configurations or without configurations.


In conventional network device deployment, network administrators are required to perform manual onsite configuration and software commissioning on each device after hardware installation is complete. Therefore, deploying a large number of geographically scattered devices is inefficient and incurs high labor costs.

ZTP addresses these issues by automatically loading version files from a file server, without requiring onsite manual intervention in device deployment and configuration.


ZTP eliminates the need for onsite device deployment and configuration, improves deployment efficiency, and reduces labor costs.

Updated: 2019-01-03

Document ID: EDOC1100055037

Views: 5577

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next