No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Basic Configurations 01

This is NE40E V800R010C10SPC500 Feature Description - Basic Configurations
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
One-click Configuration Import

One-click Configuration Import

To run commands in a batch for function configuration on a device that is properly running, load a configuration file to import configurations in one-click mode.

Usage Scenario

With the growth in network scales and complexity, network configuration becomes more complex. A large number of network device configurations are duplicate. This function allows you to import the same configurations and then manually add different configurations, reducing configuration workloads.


You can copy the system configuration data file to a local device and then load the configuration file. After the configuration file is loaded, you can directly commit the configuration, or edit the configuration through the CLI before you submit it.

After the configuration file is loaded, the configuration in the file overwrites the candidate configuration. For example, if the BGP configuration does not exist on the device but is required, you can load the configuration file to load the BGP configuration. If the loaded configuration conflicts with the existing configuration, the loaded configuration overwrites the existing configuration.


The one-click configuration import function is supported only in the two-phase configuration validation mode. After a configuration file is loaded in this mode, run the commit command to commit the configuration.


  • Repeated configuration is reduced, saving configuration workloads.
  • Remote delivery is supported, quickly responding to service environment changes.
Updated: 2019-01-03

Document ID: EDOC1100055037

Views: 5509

Downloads: 36

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next