No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - IP Services 01

This is NE40E V800R010C10SPC500 Feature Description - IP Services
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface-based UCMP Application

Interface-based UCMP Application

Device A has three physical outbound interfaces: Port 1, Port 2, and Port 3. The bandwidths of the three interfaces are 10 Gbit/s, 1 Gbit/s, and 1 Gbit/s, respectively. Three IPv4 equal-cost routes are available between Device A and Device B.

Figure 9-1 Interface-based UCMP

When UCMP is not enabled in the three interfaces, their traffic ratio is 1:1:1.

After UCMP is enabled on the three interfaces, the traffic ratio of the three interfaces approaches the bandwidth ratio 10:1:1.

Updated: 2019-01-03

Document ID: EDOC1100055041

Views: 11117

Downloads: 50

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next