No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE40E V800R010C10SPC500 Feature Description - Network Reliability
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD for PIS

BFD for PIS

Bidirectional Forwarding Detection (BFD) for process interface status (PIS) is a simple mechanism in which the behavior of a BFD session is associated with the interface status. BFD for PIS improves the sensitivity of interfaces in detecting link faults and minimizes the impact of faults on non-direct links.

After BFD for PIS is configured and BFD detects a link fault, BFD immediately sends a message indicating the Down state to the associated interface. The interface then enters the BFD Down state, which is equivalent to the Down state of the link protocol. In the BFD Down state, interfaces process only BFD packets to quickly detect link faults.

Configure multicast BFD for each BFD session to be associated with the interface status so that BFD packet forwarding is independent of the IP attributes on the interface.

Usage Scenario

Figure 2-7 BFD for PIS

In Figure 2-7, a BFD session is established between Device A and Device B, and the default multicast address is used to check the continuity of the single-hop link connected to the interface If1. After BFD for PIS is configured and BFD detects a link fault, BFD immediately sends a message indicating the Down state to the associated interface. The interface then enters the BFD Down state.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055045

Views: 13325

Downloads: 36

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next