No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE40E V800R010C10SPC500 Feature Description - Network Reliability
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Point-to-Point Ethernet LPT

Point-to-Point Ethernet LPT

shows how point-to-point Ethernet LPT is applied.Figure 7-3

Figure 7-3 Application scenario of a network configured with point-to-point Ethernet LPT

Under common conditions, data between CE1 and CE2 traverses link 1, the point-to-point network, and link 2. The point-to-point network can be built based on PWE3 or QinQ links. If a fault occurs on link 1, link 2, or the point-to-point network, communication between CE1 and CE2 is interrupted.

transmission. When link 1 is malfunctioning, PE2 disables link 2. When the point-to-point network is malfunctioning, PE1 disables link 1 and PE2 disables link 2. In this manner, CE1 and CE2 can communicate with each other by using the backup link.

Updated: 2019-01-03

Document ID: EDOC1100055045

Views: 11946

Downloads: 35

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next