No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - Network Reliability 01

This is NE40E V800R010C10SPC500 Feature Description - Network Reliability
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD for BGP

BFD for BGP

The Border Gateway Protocol (BGP) periodically sends Keepalive packets to a peer to monitor the peer's status. However, BGP takes more than 1 second for fault detection. When traffic is transmitted at gigabit rates, lengthy fault detection causes packet loss, which does not meet carrier-class network requirements for high reliability.

Bidirectional Forwarding Detection (BFD) for BGP can quickly detect faults on the link between BGP peers and notify BGP of the faults, which implements fast BGP route convergence.

Networking

As shown in Figure 2-17, Device A and Device B belong to ASs 100 and 200, respectively. The two routers are directly connected and establish an External Border Gateway Protocol (EBGP) peer relationship.

BFD is enabled to detect the EBGP peer relationship between Device A and Device B. If the link between Device A and Device B fails, BFD can quickly detect the fault and notify BGP.

Figure 2-17 BFD for BGP

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055045

Views: 11691

Downloads: 34

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next