No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - QoS 01

This is NE40E V800R010C10SPC500 Feature Description - QoS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2TP QoS Fundamentals

L2TP QoS Fundamentals

Figure 11-1 L2TP networking diagram

As shown in Figure 11-1, users need to log in to a private network through a Layer 2 network.

The LAC is a Layer 2 network device that can process PPP packets and support L2TP functions. Usually it is an access device on the local Internet Service Provider (ISP) network. The LAC is deployed between an LNS and a remote system (a remote user or a remote branch).

The LAC performs traffic rate limiting, flow queue mapping, and traffic scheduling.

The LNS is the receiving end of a PPP session. Users authenticated by the LNS can log in to the private network to access resources.

The LNS can also perform traffic rate limiting, flow queue mapping, and traffic scheduling.

The LNS supports the following QoS scheduling modes:

  • Tunnel-specific scheduling

    In this mode, services of each user are not differentiated, and therefore there is no need to allocate a Subscriber Queue (SQ) for each user. Instead, an L2TP tunnel is allocated an SQ.

  • Session-specific scheduling

    In this mode, each user is allocated an SQ and an L2TP tunnel is allocated a Group Queue (GQ). Each user has one to eight Priority Queues (PQs) on which Strict Priority (SP) scheduling or Weighted Fair Queue (WFQ) scheduling can be performed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055046

Views: 4993

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next