No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Security 01

This is NE40E V800R010C10SPC500 Feature Description - Security
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Layer Association

Application Layer Association

Application layer association associates the enabled and disabled status of control protocols and the status of the forwarding engine at the lower layer. Application layer association associates the control layer and the bottom layer and keeps the status of their protocols consistent. If the protocol of a service is disabled on the device, the bottom layer sends the corresponding protocol packets with a small bandwidth or even does not send these packets. In this manner, the attack range is minimized, the difficulty in launching attacks is increased, and device security is enhanced.

Take the BGP service for example. If NE40E is not configured with the BGP service, BGP packets that are already sent to the CPU are discarded. Through application layer association, BGP packets are discarded by the NP based on configurations on the service layer. In this manner, the CPU is free from overload.

Updated: 2019-01-03

Document ID: EDOC1100055047

Views: 12716

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next