No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Feature Description - Security 01

This is NE40E V800R010C10SPC500 Feature Description - Security
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding MAC Address Limit

Understanding MAC Address Limit

MAC address limit allows you to set the maximum number of MAC addresses to be learnt by an interface on a NE40E. When the number of learnt MAC addresses reaches the set maximum number, the interface forwards a subsequent packet if the source MAC address of the packet exists in the MAC table; the interface forwards or discards a subsequent packet if the source MAC address of the packet does not exist in the MAC table based on the action configured in MAC address limit. For example, the packet is discarded by the interface if the action is configured as Discard.

Updated: 2019-01-03

Document ID: EDOC1100055047

Views: 12519

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next