No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - System Monitor 01

This is NE40E V800R010C10SPC500 Feature Description - System Monitor
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TWAMP Applications on an IP Network

TWAMP Applications on an IP Network

As shown in Figure 7-8, Device A, Device B, and Device C on an IP network function as the servers in a TWAMP test. Device E functions as the control-client and specifies an IP address to start collecting statistics. Device E sends statistics to the performance management system.

Users can compare statistics to measure the performance of network segments. For example, to measure the performance of the IP network between Device A and Device B, the control-client initiates a TWAMP test for Device A and Device B each. Users can check the statistics about the performance of the IP network between Device A and Device B by comparing the two sets of statistics.

Figure 7-8 TWAMP applications on an IP network

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055050

Views: 5100

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next