No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - System Monitor 01

This is NE40E V800R010C10SPC500 Feature Description - System Monitor
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TWAMP Light Application on an L3VPN

TWAMP Light Application on an L3VPN

On the network shown in Figure 8-6, the Router that functions as the Controller initiates a TWAMP Light test to the CE that resides on an L3VPN and functions as the Responder.

The Controller is deployed on the aggregation node, and the Responder is deployed on the last hop of the link connecting to a base station. You can query the TWAMP Light test results using commands on the Controller or through the NMS.

Figure 8-6 TWAMP Light application on an L3VPN

The Controller and Responder are routable.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055050

Views: 5092

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next