No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Feature Description - Virtual-Cluster-Chassis 01

This is NE40E V800R010C10SPC500 Feature Description - Virtual-Cluster-Chassis
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Virtual Cluster

Application Scenarios for Virtual Cluster

The main application scenario for a virtual cluster is DCI (Date Center Interconnect), being used to replace traditional dual-system cluster protection. Deploying a virtual cluster in such scenarios can greatly simplify network design, reducing network O&M manpower and costs.

An example of the traditional dual-system protection networking solution is provided in the following figure.



In this scenario, the following must be deployed: six PWs, a dual-system VRRP, E-Trunk, and MPLS TE. The solution is therefore highly complex, requiring skilled O&M personnel to maintain.

An example of a virtual cluster networking solution is provided in the following figure.

Between the two DCs in this scenario, only one PW and MPLS TE need to be deployed. This greatly simplifies the protection solution, configuration, and maintenance.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055054

Views: 2271

Downloads: 33

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next