No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction

Introduction

Ethernet cable is of two types: the straight-through cable and the crossover cable.

Straight-through Cable

The straight-through cable is used to connect the Ethernet interfaces between the following devices:

  • A router device and a hub

  • A router device and an Ethernet switch

  • A computer and an Ethernet switch

  • A computer and a hub

Crossover Cable

The crossover cable is used to connect the Ethernet interfaces between the following devices:

  • A router device and a router device

  • A router device and a computer
  • A hub and a hub

  • A hub and a switch

  • A switch and a switch

  • A computer and a computer

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40277

Downloads: 286

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next