No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cabinet Introduction

Cabinet Introduction

The NE40E can be mounted in an N68E-22 cabinet or an International Electrotechnical Commission (IEC) 19-inch standard cabinet. For the latter one, the depth should not be less than 800 mm (31.50 in.), and its column should be at a distance of 100 mm (3.94 in.) away from the front door. The N68E-22 interior is 46 U (2044.7 mm or 80.50 in.)high and its dimensions are 600 mm x 800 mm x 2200 mm (23.62 in. x 31.50 in. x 86.61 in.).

The outline of the N68E-22 cabinet is shown in Figure 1-1.

Figure 1-1 N68E-22 cabinet outline

Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 39090

Downloads: 283

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next