No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Label Printing

Label Printing

The contents can be printed or written on labels. Printing is recommended as it is usually more efficient and maintains consistency.

Template for Printing

You must use a template to print a label. You can obtain the template in the following ways:
  • Log in to the technical support website at to download the template. Here is the path:Cable Engineering Label Printing Template.
  • Obtain the template from the Huawei local office.
The template is made in Microsoft Word. Adhere to the following requirements when using the template:
  • You can modify the contents of the template if required. However, do not change the centered setting, direction, and fonts of the characters.
  • You can use a smaller text size if there is too much information to fill in, but ensure that the text can still be read clearly after it has been printed out.

Merging Cells in the Template

To merge two or more cells, do as follows:
  1. Choose Edit > Select All.
  2. Choose Format > Borders and Shading > Borders. Click the Box tab and click OK.
  3. Drag the mouse to select cells to be merged and choose Table > Merge Cells.

Requirements for the Printer

A laser jet printer is required for printing labels. Before printing a label, adjust the page setup and print some test labels.
  1. Cover a piece of label paper with an ordinary piece of blank paper, and check whether the page setup conforms to the requirements.
  2. Make sure the printer properties such as "paper size" and "direction" have been set correctly.
  3. Try printing and check that the printout is clear and correctly laid out:
    • If yes, print labels directly.
    • If not, adjust the page setup and try printing again. Repeat until the correct printout is produced.
Do as follows to adjust the page setup:
  1. Choose File > Page Setup.
  2. Choose Layout and set Header and Footer to 0.
  3. Click the Margins tab. Select Left for Gutter Position and set Top, Bottom, Left, and Right.

    If the warning prompt as shown in Figure 6-3 appears before printing, click Ignore to continue printing.

    Figure 6-3 Warning prompt before printing

After the page setup has been made correctly, save it for future use. This page setup is only necessary for the first time you use the template to print labels.

Requirements for Feeding Paper Into the Printer

Different from ordinary paper, a piece of label paper is composed of two layers. Feed in label papers one piece at a time manually. Never use auto-feed for label paper to avoid paper jams.

Different models of printers may have different methods of feeding paper. Make sure to feed in label papers correctly.

Requirements for Printed Labels

Make sure that the printed labels satisfy the following requirements:
  • All the printouts are within the label.
  • Contents in cells are aligned in the center. In a single-line printout, the dividing lines and the "TO:" should not be covered by printed text.
  • When the cells are merged and the printouts are made in multiple lines, avoid covering the "TO:" with printing text. To do so, use space bar to move the printing contents to the next line.
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 52312

Downloads: 382

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next