No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Labels for Trunk Cables Between Devices

Labels for Trunk Cables Between Devices

Meaning of Labels for Trunk Cables Between Devices

Table 6-5 provides information on a label for a trunk cable between devices.

Table 6-5 Information on a label for a trunk cable between devices

Content

Meaning

Description

MN-B-C-D-R/T

MN: cabinet number

The row and column number of a cabinet. For example, A01 indicates row A, column 01.

B: chassis number

A two-digit number that indicates the position of a chassis in a cabinet, for example, 01. Chassis are numbered from bottom to top.

C: physical slot number

A two-digit number, for example, 01. Slots are numbered from top to bottom and from left to right.

D: interface number

A two-digit number, for example, 01. Interfaces are numbered from top to bottom and from left to right.

R: receive optical interface

T: transmit optical interface

-

MN-B-C-D-R/T

MN: cabinet number

The row and column number of a cabinet. For example, A01 indicates row A, column 01.

B: chassis number

A two-digit number that indicates the position of a chassis in a cabinet, for example, 01. Chassis are numbered from bottom to top.

C: physical slot number

A two-digit number, for example, 01. Slots are numbered from top to bottom and from left to right.

D: interface number.

A two-digit number, for example, 01. Interfaces are numbered from top to bottom and from left to right.

R: receive optical interface

T: transmit optical interface

-

Example Label

Figure 6-12 shows an example label for a trunk cable between devices.

Figure 6-12 Example label for a trunk cable between devices

The label shown in Figure 6-12 contains the following information:

  • "G01-01-05-01-T" indicates that the local end of the trunk cable is connected to transmit interface 01 on slot 05 in chassis 01 in the cabinet in row G, column 01.
  • "D02-01-01-01-R" indicates that the other end of the trunk cable is connected to receive interface 01 on slot 01 in chassis 01 in the cabinet in row D, column 02.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40211

Downloads: 286

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next