No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction

Introduction

The console interface cable is used to connect the console interface on the NE40E to the serial interface of the console to transmit configuration data of the NE40E.

The console interface cable is an 8-core shielded cable. One end of the cable is an RJ45 connector connected to the console interface on the MPU. The other end has DB9 and DB25 connectors, either of which is connected to the serial interface on a computer.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40173

Downloads: 286

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next