No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Package Container

Checking the Package Container

Before unpacking and checking the products, check whether the package container is intact.

Procedure

  1. Unload the products.

    When unloading the products, place the package containers in order. Make sure that the product labels on the package containers are in the same direction. This facilitates the checking.

  2. After unloading the products, check whether the total number of the products are the same as the number indicated on the Packing List. Check whether the destination of delivery is the same as the actual site for installation.

    Condition

    Action

    The total number of products are the same as the number indicated on the Packing List, and the products are delivered to the correct destination.

    Perform step 4.

    The total number of products are different from the number indicated on the Packing List, or the products are delivered to the wrong destination.

    Perform step 3.

  3. The engineering supervisor must send the Cargo Inspection Feedback Form that is confirmed and signed by the customer to the order management engineer in the local Huawei representative office within three days. At the same time, stop unpacking the products.
  4. Check whether the exterior of the package container is intact. Check whether the package container is placed correctly during transportation.

    Condition

    Action

    The external package is intact.

    Unpack and check the products.

    The exterior of the package container is seriously damaged or shows signs of water penetration.

    Perform step 5.

  5. Stop unpacking the products, trace the cause, report the problem to the order management engineer of the local Huawei representative office, and wait for further assistance.

    To protect the device and trace the cause, transfer the unpacked device indoors to ensure proper storage. Take photographs of the storage site, the device that is rusted or corroded, the related package container, and the package materials. Collect the photos and file them. Preserve the package container and package materials that are unpacked.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40793

Downloads: 292

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next