No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Equipment Room Layout

Equipment Room Layout

The equipment room is usually used to install mobile switching equipment, telecom transmission equipment, and power supply equipment, as well as other auxiliary equipment. To ensure easy maintenance and management, telecom equipment can be placed in different rooms according to its function. Figure 2-1 shows the plane layout of an equipment room.
Figure 2-1 Layout of an equipment room

The general layout principles of the equipment room are as follows:
  • It should meet anticipated requirements for laying out and maintaining communication cables and power cables.
  • Cabling distance should be minimized, which eases cable maintenance, reduces potential communication faults, and raises efficiency.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40843

Downloads: 292

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next