No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Labels for User Cables

Labels for User Cables

This section describes the applicable ranges and meaning of the labels for user cables.

Attach labels to both ends of a cable to indicate the locations of the cable on the device and the MDF.

Meaning of the Labels for User Cables

Table 6-7 provides information on a label for a user cable.

Table 6-7 Information on a label for a user cable





MN: cabinet number

The row and column number of a cabinet. For example, A01 indicates row A, column 01.

B: frame number

A two-digit number that indicates the position of a frame in a cabinet, for example, 03. Frames are numbered from bottom to top.

C: physical slot number

A two-digit number, for example, 01. Slots are numbered from top to bottom and from left to right.

D: cable number

A two-digit number, for example, 01. Cables are numbered from top to bottom and from left to right.


MN: MDF number

M identifies the row number of an MDF. Rows are numbered from A to Z from front to back.

N identifies the column number of an MDF. Columns are numbered from 01 to 99 from left to right.

For example, G01 indicates row G, column 01.

B: row number of a terminal device

A two-digit number ranging from 01 to 99, for example, 01.

C: column number of the terminal device

Example Label

Figure 6-14 shows an example label for a user cable.

Figure 6-14 Example label for a user cable

The label shown in Figure 6-14 contains the following information:

  • "A01-03-01-01" indicates that the local end of the user cable is connected to port 01 on slot 01 in chassis 03 in the cabinet in row A, column 01.
  • "MDF-G01-01-01" indicates that the other end of the user cable is connected to the terminal in row 01, column 01 of the MDF in row G, column 01.
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 44649

Downloads: 338

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next