No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mechanical Stress Requirements

Mechanical Stress Requirements

Table 2-14 shows the requirements for mechanical stress.

Table 2-14 Mechanical stress requirements for device operation




Sinusoidal vibration


≤ 5 mm/s




≤ 2 m/s2


5 Hz - 62 Hz

62 Hz - 200 Hz

Unsteady bump

Shock response spectrum II

Semi-sine wave, 30 m/s2, 11 ms, 3 bumps in each direction

Static load

0 kPa


A shock response spectrum is a graphical representation of an arbitrary transient acceleration input. A static load is a mechanical force applied slowly to an assembly or object.

Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 52452

Downloads: 382

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next