No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Installation

Checking the Installation

After you complete the hardware installation, you need to check the installation of the devices and cables.

Prerequisite

All hardware devices and cables must be installed.

Background Information

A check before power-on is performed to ensure that the hardware is installed properly. This is mainly to check the appearance of the devices, and also the cabinet, cables, plugs, sockets, labels, and environment.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 44322

Downloads: 333

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next