No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking After Powering on a Device

Checking After Powering on a Device

After powering on a device, you need to check:

  • Whether you can hear that the fans are rotating and the air is exhausted from the airway after the device is powered on.

  • Whether the indicator of the power module is normal. In normal cases, the green indicators PWR IN and PWR OUT are constantly on, and the red indicator ALM is always off.

  • Whether the indicator of the fan module is normal. In normal cases, the green indicator RUN flashes (frequency: 1Hz), and red indicator ALM is always off.

  • Whether the indicator of the board is normal. In normal cases, the indicator RUN flashes, and the indicator ALM is always off.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40138

Downloads: 286

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next