No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the NE40E-X8A in a 19-inch Rack in North America

Installing the NE40E-X8A in a 19-inch Rack in North America

  • The device is heavy, and requires four people to lift and move.
  • When you install the device in a cabinet, hold the handles at both sides of the device, and do not use handles of any other module and avoid stepping on the air filter at the bottom of the cabinet.

The following figure shows how to move the NE40E-X8A.

Figure 10-18 Moving the NE40E-X8A

NOTE:

A tray is required when the NE40E-X8A is installed in a 23-inch rack.

Figure 10-19 A 23-inch rack with a tray

Procedure

  1. Install the mounting brackets of the tray. Ensure that two edge holes are reserved for each mounting bracket.

    Figure 10-20 Install the mounting brackets of the tray

  2. Install the tray in the rack.
    Figure 10-21 Install the tray in the rack

  3. Stick the sponge pads to the tray.
    Figure 10-22 Stick the sponge pads to the tray

  4. Remove the original mounting brackets of the NE40E-X8A.
    Figure 10-23 Remove the original mounting brackets of the NE40E-X8A

  5. Install the delivery-attached mounting brackets.
    Figure 10-24 Install the delivery-attached mounting brackets

  6. Install the NE40E-X8A in the rack using screws.
    Figure 10-25 Install the NE40E-X8A in the rack using screws

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40895

Downloads: 292

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next