No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to the NE40E-X3A

Introduction to the NE40E-X3A

Components

Figure 12-1 Front view of the NE40E-X3A

Figure 12-2 Rear view of the NE40E-X3A

No.

Part

Quantity

1

Handle

4

2

Air intake vent

1

3

Cable tray

2

4

Mounting ear

2

5

Fan module

1

6

Fan module cage cover

1

7

LPU slot

3

8

ESD jack

1

9

MPU slot

2

10

Ground terminal

1

11

Air exhaust vent

1

12

Air filter

1

13

Power module

2 (1+1 for redundancy)

Clearances Around the NE40E-X3A

The Figure 12-3 shows the air flow path of the NE40E-X3A.

Figure 12-3 NE40E-X3A air flow path

Allow at least 75 mm (2.95 in.) of clearance around the air intake vent of the NE40E-X3A, and 1 U of clearances between chassis.

Figure 12-4 Clearance around the NE40E for heat dissipation

Allow at least 350 mm (13.78 in.) of clearance around the air filter of the NE40E-X3A for maintenance.

Figure 12-5 Clearance around the NE40E-X3A for maintenance

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 51373

Downloads: 380

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next