No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E V800R010C10SPC500 Installation Guide

This is NE40E V800R010C10SPC500 Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cabinet Specifications

Cabinet Specifications

Huawei standard cabinets are recommended. A self-purchases cabinet must meet the following requirements.

  1. The cabinet must be a 19-inch standard cabinet. The depth of the cabinet is greater than 800 mm (31.50 in.), and the interior height inside the cabinet is not smaller than 2000 mm (78.74 in.).
    NOTE:
    NE40E-X16A must be installed in a cabinet with an air filter. If the NE40E-X16A is installed on an open rack, install an air filter door.
  2. A mounting bar is more than 150 mm (5.91 in.) from the front door of the cabinet. The front door is less than 25 mm (0.98 in.) thick, ensuring that the available space is over 125 mm (4.92 in.).



  3. The porosity must be larger than 50% on the front and rear doors.
  4. The cabinet must contain installation accessories, such as guide rails, floating nuts, and screws.
  5. There must be a cable outlet on the top of and at the bottom of the cabinet.
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055059

Views: 40180

Downloads: 286

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next