No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE40E V800R010C10SPC500 Product Description

This is NE40E V800R010C10SPC500 Product Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv6 Backbone Network Solution

IPv6 Backbone Network Solution

This section describes the IPv6 backbone network solution.

Figure 5-4 shows how the NE40E is applied on an IPv6 backbone network.

Figure 5-4 Application of the NE40E on an IPv6 backbone network

When IPv4 and IPv6 coexist on the backbone network, IPv4 forwarding or MPLS VPN can be used to ensure that existing IPv4 services are not affected. In addition, the following requirements must be met:

  • Interconnection between separate IPv6 networks
  • Interworking between IPv6 and IPv4 networks

To meet the preceding requirements, NE5000Es, and NE40Es can work together to provide the following solutions:

  • All routers on the backbone network support the IPv4/IPv6 dual stack. IPv4 services are forwarded using IPv4, and IPv6 services are forwarded using IPv6.
  • The separate IPv6 networks are interconnected over 6to4 or manually configured Layer 3 tunnels. The core routers only need to support IPv4 forwarding and do not need to be upgraded.
  • The separate IPv6 networks are interconnected over MPLS L2VPN connections, such as VPLS or CCC connections. The core routers only need to support MPLS forwarding. The interworking between IPv6 and IPv4 networks is implemented by configuring NAT-PT on gateways.
Updated: 2019-01-03

Document ID: EDOC1100055060

Views: 3557

Downloads: 153

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next