No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IP-Prefix Tunnel Function Configuration

Verifying the IP-Prefix Tunnel Function Configuration

After configuring the IP-prefix tunnel function, verify the tunnel information, including the tunnel status, a P2P TE tunnel template used to establish tunnels, and IP prefix list.

Prerequisites

The IP-prefix tunnel function has been configured.

Operations

Table 3-3 Items to be checked and related commands

Operation

Command

Check the configuration of a P2P TE tunnel template.

display mpls te p2p-template

Check whether P2P TE tunnels are successfully established using the automatic primary tunnel function.

display mpls te tunnel

Check detailed information about the automatic primary tunnel function.

display mpls te tunnel-interface [ auto-primary-tunnel [ tunnel-name ] ]

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19742

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next