No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Dynamic BFD to Monitor an mLDP P2MP Tunnel

Enabling Dynamic BFD to Monitor an mLDP P2MP Tunnel

Dynamic BFD for mLDP P2MP tunnel can detect the primary tree faults of a P2MP tunnel only after this function is enabled.

Context

Perform the following steps on each root and leaf node:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd

    The BFD view is displayed.

  3. Run quit

    The system view is displayed.

  4. Run mpls

    The MPLS view is displayed.

  5. Run mpls mldp bfd enable

    Dynamic BFD is enabled to monitor an mLDP P2MP tunnel.

  6. Run mpls mldp p2mp bfd-trigger-tunnel all

    A policy is configured to dynamically establish a BFD session to monitor an mLDP P2MP tunnel.

  7. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19613

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next