No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Dynamic BFD to Monitor an LDP Tunnel

Verifying the Configuration of Dynamic BFD to Monitor an LDP Tunnel

After configuring dynamic BFD to monitor an LDP tunnel, you can view BFD session information on the ingress on which an LDP tunnel is established.

Prerequisites

The dynamic BFD for LDP tunnel function has been configured.

Procedure

  • Run the display mpls bfd session protocol ldp [ fec ip-address ] [ bfd-type ldp-tunnel ] [ verbose ] command to check information about all BFD sessions that monitor MPLS tunnels on the ingress.

Example

Run the display mpls bfd session protocol ldp bfd-type ldp-tunnel verbose command on the ingress. The command output shows that a BFD session is in the Up state and has been bound to a tunnel with the type of LDP_TUNNEL.

<HUAWEI> display mpls bfd session protocol ldp bfd-type ldp-tunnel verbose
--------------------------------------------------------------------------------
                        BFD Information: LDP  Tunnel                           
--------------------------------------------------------------------------------
  No                     : 1
  LspIndex               : 5000006
  Protocol               : LDP
  Fec                    : 4.4.4.9
  Bfd-Discriminator      : 16385
  ActTx                  : 10
  ActRx                  : 10
  ActMulti               : 3
  Bfd-State              : Up
  Time                   : 56815 sec
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 22052

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next