No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Disabling a Device from Forwarding Unknown TLVs

(Optional) Disabling a Device from Forwarding Unknown TLVs

A local device can be disabled from forwarding unknown TLVs to peers.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls ldp

    MPLS LDP is globally enabled.

  3. Run propagate mapping unknown-tlv disable

    A local device is disabled from forwarding unknown TLVs.

    Consequently, upon receipt of such TLV information, an upstream device cannot handle the unknown TLV information, which causes problems. To prevent the problems, run the propagate mapping unknown-tlv disable command on the local device to disable this device from forwarding unknown TLV information to the upstream device.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19906

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next