No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting RSVP Signaling Parameters

Adjusting RSVP Signaling Parameters

RSVP-TE supports various signaling parameters, which meet requirements for reliability and network resources, and requirements of MPLS TE advanced functions.

Usage Scenario

RSVP TE supports diversified signaling parameters, which meet requirements of reliability and network resources and some MPLS TE advanced features.

Pre-configuration Tasks

Before adjusting RSVP signaling parameters, enable MPLS TE and RSVP-TE.

Configuration Procedures

Perform one or more of the following configurations as required.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19904

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next