No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling RSVP-TE Reservation Confirmation

Enabling RSVP-TE Reservation Confirmation

RSVP-TE reservation confirmation configured on the egress of a tunnel verifies that resources are successfully reserved.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te resvconfirm

    RSVP-TE reservation confirmation is enabled.

    After a node receives a Path message, it initiates reservation confirmation by sending a Resv message carrying an object that requests for reservation confirmation.

    NOTE:

    Receiving ResvConf messages does not mean that resource reservation is successful. It means that, however, resources are reserved successfully only on the farthest upstream node where this Resv message arrives. These resources may be preempted by other applications later.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19818

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next