No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring LDP Traffic Statistics Collection

Configuring LDP Traffic Statistics Collection

LDP traffic information on the ingress and transit nodes of an LSP can be queried only after LDP traffic statistics collection is configured.

Usage Scenario

To obtain LDP LSP traffic statistics, configure LDP traffic statistics collection.

LDP traffic statistics contains forwarded traffic data. Therefore, statistics collection is configured only on the ingress and transit nodes.

LDP traffic statistics collection enables the ingress or a transit node to collect statistics only about outgoing LDP LSP traffic with the destination IP address mask of 32 bits.

Pre-configuration Tasks

Before configuring LDP statistics collection, configure an LDP LSP.

Configuration Procedures

Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 21804

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next