No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an RSVP GR Helper

Configuring an RSVP GR Helper

An RSVP GR Helper is configured to allow devices along an RSVP-TE tunnel to retain RSVP sessions during a master/backup switchover.

Usage Scenario

The NE20E can only function as a GR Helper to help a neighbor node to complete RSVP GR. The RSVP GR Helper needs to be configured only after GR is enabled on the neighbor node that supports the RSVP GR Restarter. If a local device is only connected to NE20Es running the same version with the local device, there is no need to configure the RSVP GR Helper on the local device.

Pre-configuration Tasks

Before configuring an RSVP GR Helper, configure an RSVP-TE tunnel.

Configuration Procedures

Figure 3-15 RSVP GR Helper configuration
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19437

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next