No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RSVP Authentication Configuration

Verifying the RSVP Authentication Configuration

After configuring RSVP authentication, you can view information about RSVP authentication.

Prerequisites

RSVP authentication has been configured.

Procedure

  • Run the display mpls rsvp-te command to check RSVP-TE configurations on a specific interface.
  • Run the display mpls rsvp-te peer [ interface interface-type interface-number | peer-address ] command to check RSVP-TE neighbor information on an RSVP-TE-enabled interface.

Example

Run the following command to check the previous configurations.

Run the display mpls rsvp-te peer command to view information about RSVP-TE neighbors on an RSVP-TE-enabled interface.

<HUAWEI> display mpls rsvp-te peer
Interface GigabitEthernet0/1/1
 Neighbor Addr: 10.1.1.2
 SrcInstance: 0x4F7FEC90                NbrSrcInstance: 0x0
 PSB Count: 0                           RSB Count: 1
 Hello Type Sent: NONE                  Neighbor Hello Extension: DISABLE
 SRefresh Enable: NO
 Authentication: ENABLE
 WindowsSize: 1
 Last Valid Seq # rcvd: NULL

Remote Node id Neighbor
 Neighbor Addr: 2.2.2.9
 SrcInstance: 0x4F7FEC90                NbrSrcInstance: 0x0
 PSB Count: 0                           RSB Count: 0
 Hello Type Sent: NONE                  Neighbor Hello Extension: DISABLE
 SRefresh Enable: NO
 Authentication: ENABLE
 WindowsSize: 1
 Last Valid Seq # rcvd: NULL

Config Neighbor
 Neighbor Addr: 2.2.2.9
 SrcInstance: 0x4F7FEC90                NbrSrcInstance: 0x0
 PSB Count: 0                           RSB Count: 0
 Hello Type Sent: NONE                  Neighbor Hello Extension: DISABLE
 SRefresh Enable: NO
 Authentication: ENABLE
 WindowsSize: 1
 Last Valid Seq # rcvd: NULL
Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19472

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next