No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS TE Configuration

MPLS TE Configuration

This chapter describes the principles for Multiprotocol Label Switching Traffic Engineering (MPLS TE), Resource Reservation Protocol (RSVP) TE tunnels, RSVP signaling parameter adjustment, RSVP authentication, tunnel parameter adjustment, measures for adjusting TE forwarding, the bandwidth flood threshold, tunnel re-optimization, MPLS TE fast reroute (FRR), MPLS TE Auto FRR, constraints-routed label switched path (CR-LSP) backup, isolated LSP computation, RSVP graceful restart (GR), static bidirectional forwarding detection (BFD) for CR-LSP, dynamic BFD for CR-LSP, MPLS TE distribution, and how to configure MPLS TE, and provides configuration examples.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19837

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next