No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring LDP Graceful Deletion

(Optional) Configuring LDP Graceful Deletion

LDP graceful deletion can be configured to speed up traffic switching using LDP-IGP synchronization, which improves network reliability.

Context

LDP graceful deletion can be configured in the LDP-IGP synchronization or LDP FRR scenario to speed up traffic switching. It helps uninterruptedly transmit traffic during traffic switching, which improves reliability of the entire network.

If the physical and protocol status of the primary link is proper but the LDP session on the primary link goes Down, LDP-IGP synchronization enables LDP to inform the IGP of the primary link fault, and the IGP advertises the maximum cost value for the primary link. After that, LDP immediately instructs the upstream device to withdraw labels and assigns labels to the upstream device because a new LSP is established on the secondary link, which prolongs the LSP convergence time. As a result, packet loss occurs.

After the LDP session on the faulty link goes Down, LDP does not immediately instruct the upstream device to withdraw labels but keeps the labels and LSP and allows traffic to be transmitted on the primary link until the LSP convergence is complete on the secondary link. This ensures uninterrupted traffic and speeds up LDP-IGP synchronization.

Perform the following steps on the LDP-IGP synchronization-enabled LSR:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls ldp

    The MPLS-LDP view is displayed.

  3. Run graceful-delete

    LDP graceful deletion is enabled.

  4. (Optional) Run graceful-delete timer timer

    The graceful deletion timer value is set.

    After the LDP session goes Down, LDP does not instruct the upstream device to withdraw labels until the graceful deletion timer expires.

    NOTE:

    If the graceful deletion timer value is too large, the invalid LSP will be kept for a long time, which consumes system resources.

  5. Run commit

    The configurations are committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 20045

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next