No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an AGG and a Core ABR as RRs

Configuring an AGG and a Core ABR as RRs

In the intra-AS seamless MPLS networking, the AGG and core ABR can be configured as RRs so that CSGs and MASGs can learn one another's loopback routes. The loopback route information is used to establish an MP-IBPG peer relationship between each CSG and MASG.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run ipv4-family unicast

    The IPv4 unicast address family view is displayed.

  4. Run peer { ipv4-address | group-name } reflect-client

    An RR is configured, and the peer is specified as a client.

    The AGG's clients are its connected CSG and core ABR. The core ABR's clients are its connected AGG and MASG.

  5. Run peer { ipv4-address | group-name } next-hop-local

    The device is configured to use its own IP address as the next-hop address of routes when advertising these routes.

    To enable the AGG or core ABR to advertise routes with the next-hop address set to a local address, run the peer next-hop-local command on the AGG or core ABR.

  6. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 20090

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next