No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Reliable RSVP Message Transmission

(Optional) Configuring Reliable RSVP Message Transmission

When BFD is not configured on a network, reliable RSVP message transmission can be configured to increase the success rate of detecting link faults, which minimize long-time traffic loss inducted by link intermittent disconnections.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls te

    MPLS TE is globally enabled.

  4. Run mpls rsvp-te

    RSVP-TE is enabled.

  5. Run mpls rsvp-te reliable-delivery

    Reliable RSVP message transmission is enabled.

  6. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19475

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next