No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Capability of Passively Creating BFD Sessions on the Egress

Enabling the Capability of Passively Creating BFD Sessions on the Egress

On a unidirectional LSP, creating a BFD session on the ingress playing the active role triggers the sending of LSP ping request messages to the egress node playing the passive role. Only after the passive role receives the ping packets, a BFD session can be automatically established.

Context

Perform the following steps on the egress:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd

    The BFD view is displayed.

  3. Run mpls-passive

    The capability of passively creating BFD sessions is enabled.

    After this command is run, a BFD session can be created only after the egress receives an LSP ping request message containing the BFD TLV from the ingress.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19807

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next