No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the LDP Multi-Instance

Enabling the LDP Multi-Instance

This section describes how to configure the LDP multi-instance. Before you configure the LDP multi-instance, enable LDP for the specified VPN instance on each node.

Context

To configure the transport address for an LDP instance, you must use the IP address of the interfaces that are bound to the same VPN instance.

NOTE:

In LDP multiple instances, you can use the interface address to establish a session.

Perform the following steps on each LSR in an MPLS domain:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls ldp vpn-instance vpn-instance-name

    LDP for the specified VPN instance is enabled, and the MPLS LDP VPN instance view is displayed.

    Note the following:

    • Configurations in the MPLS LDP VPN instance view only take effect on LDP-enabled interfaces that are bound to the same VPN instance.

    • Configurations in the MPLS LDP view do not take effect on LDP-enabled interfaces that are bound to the VPN instance.

  3. (Optional) Run lsr-id lsr-id

    An LSR ID is configured for the LDP VPN instance.

    NOTE:

    In most applications, use the default LDP LSR ID. In some networking schemes that VPN instances are used, for example, BGP or MPLS VPN, configure an LSR ID separately for the LDP multi-instance to ensure normal establishment of a TCP connection, if the address space of the VPN overlaps that of the public network.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19757

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next