No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of MPLS

Overview of MPLS

MPLS speeds up network forwarding and is used to transmit various new services.

MPLS takes place between the data link layer and network layer in the TCP/IP protocol stack. MPLS supports label switching between multiple network protocols, as implied by its name. MPLS can use any Layer 2 media to transfer packets, but is not exclusive by any specific protocol on the data link layer.

MPLS is derived from the Internet Protocol version 4 (IPv4). The core MPLS technology can be extended to multiple network protocols, such as the Internet Protocol version 6 (IPv6), Internet Packet Exchange (IPX), Appletalk, DECnet, and Connectionless Network Protocol (CLNP). Multiprotocol in MPLS means that the protocol supports multiple network protocols.

The MPLS technology supports multiple protocols and services and improves data transmission security.

Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19583

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next