No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE20E-S V800R010C10SPC500 Configuration Guide - MPLS 01

This is NE20E-S V800R010C10SPC500 Configuration Guide - MPLS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Connectivity of a TE Tunnel

Checking Connectivity of a TE Tunnel

The connectivity of a TE tunnel between the ingress and egress is checked.

Context

After configuring an MPLS TE tunnel, you can run the ping lsp command on the ingress of the TE tunnel to verify that the ping from the ingress to the egress is successful. If the ping fails, run the tracert lsp command to locate the fault.

Procedure

  • Run the ping lsp [ -a source-ip | -c count | -exp exp-value | -h ttl-value | -m interval | -r reply-mode | -s packet-size | -t time-out | -v ] * te tunnel tunnel-number [ hot-standby ] [ compatible-mode ]command to check the connectivity of a TE tunnel from the ingress to the egress.

    If hot-standby is configured, a hot-standby CR-LSP is checked.

  • Run the tracert lsp [ -a source-ip | -exp exp-value | -h ttl-value | -r reply-mode | -t time-out | -s size ] * te tunnel tunnel-number [ hot-standby ] [ compatible-mode ] [detail ]command to check the nodes through which data packets pass along a TE tunnel from the ingress to the egress.

    If hot-standby is configured, a hot-standby CR-LSP is checked.

Translation
Download
Updated: 2019-01-03

Document ID: EDOC1100055103

Views: 19552

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next